| Customization: | Available |
|---|---|
| After-sales Service: | Installation, Commissioning, Technical Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Jiutian Horizontal Biomass Dry Distillation Carbonization Furnace is based on the characteristics of long rod biomass such as logs, wood, sawdust, and jute rods. It adopts horizontal structure, manual charging, cart feeding, and discharging, and advanced hot air dry distillation The carbonization process technology adopts the unique carbonization combustible gas back-burning technology so that the flue gas generated by carbonization can be fully utilized to meet the heat demand of the carbonization furnace itself.
Jiutian horizontal biomass carbonization furnace is composed of carbonization inner tank, insulation layer, furnace door, skip, combustible gas backburner pipe, dehumidification buffer tank, burner, exhaust pipe and thermometer. It can be equipped with pre-burning gasification Furnaces, flue gas purification devices, etc. The furnace uses the principle of anaerobic carbonization to remove volatile matter from biomass to achieve biomass carbonization. The carbonization process is completed in four steps: charging and sealing the furnace - preheating and drying - oxygen-free carbonization - cooling to produce charcoal. Furnace charging and sealing is to stack the biomass raw materials to be carbonized into a skip, push them into the carbonization furnace, seal the lid, and lock the furnace door; preheating and drying is to heat the furnace with fuel such as wood, and slowly heat it from normal temperature to 220°C -250ºC, the process time is 1.2-2.0 hours, and the moisture in the material and the air in the inner tank are discharged; anaerobic carbonization is when the temperature in the furnace is heated until faint yellow smoke begins to be discharged from the smoke pipe, that is, carbonization begins, and the combustible gas is recovered and enters the furnace for ignition. , adjust the air intake, and keep the temperature in the inner tank at 300-450°C for 2.0-3.5 hours. When the furnace naturally turns off, the carbonization is completed. To cool the charcoal, open the cooling water valve to cool the inner tank. When the temperature drops below 50°C, open the lid and release the charcoal.
1. Protect the environment, make full use of crop residues, and turn waste into treasure;
2. Reasonable structure, stable working performance, easy operation;
3. Low water content, high density and incineration resistance;
4. Regular shape, reasonable layout, easy to use: uniform length and size, hollow or solid structure, conducive to combustion and use;
5. The equipment has wide adaptability, can be used to make toner from various raw materials, and press toner rods and toner balls of different shapes according to requirements.
| Model |
Capacity(m³)/ Carbonization time |
Length(m) | Width(m) | Internal Diameter(m) | Internal Length(m) | Material |
|---|---|---|---|---|---|---|
| JTWT300 | 1.2/6h | 1.9 | 1.15 | 1.7 | 0.95 | Carbon steel |
| JTWT700 | 3/7h | 1.9 | 1.7 | 1.7 | 1.5 | |
| JTWT1000 | 4.76/7h | 2.9 | 1.7 | 2.7 | 1.5 | |
| JTWT1600 | 7.65/9h | 2.9 | 2.2 | 2.7 | 1.9 | |
| JTWT2000 | 10.48/10h | 3.9 | 2.2 | 3.7 | 1.9 | |
| JTWT3100 | 15.86/12h | 5.8 | 2.2 | 5.6 | 1.9 |
Q1. What is the MOQ?
1 set.
){kind=link}